|
Section 1194.25 Self-Contained, Closed Products – Detail |
||
|
Criteria |
Supporting Features |
Remarks and
explanations |
|
(a)
Self contained products shall be usable by people with disabilities
without requiring an end-user to attach Assistive Technology to the
product. Personal headsets for private listening are not Assistive
Technology. |
|
This
is a simple device. Once wires
are connected, no further hardware interaction is required. |
|
(b)
When a timed response is required, the user shall be alerted and given
sufficient time to indicate more time is required. |
|
Timed
responses are not required, |
|
(c)
Where a product utilizes touchscreens or contact-sensitive controls, an
input method shall be provided that complies with §1194.23 (k) (1)
through (4). |
|
Touch
screens are not utilized. |
|
(d)
When biometric forms of user identification or control are used, an
alternative form of identification or activation, which does not require
the user to possess particular biological characteristics, shall also be
provided. |
|
Biometric
forms are not utilized. |
|
(e)
When products provide auditory output, the audio signal shall be provided
at a standard signal level through an industry standard connector that
will allow for private listening. The product must provide the ability to
interrupt, pause, and restart the audio at anytime. |
|
Auditory
output is not utilized. |
|
(f)
When products deliver voice output in a public area, incremental volume
control shall be provided with output amplification up to a level of at
least 65 dB. Where the ambient noise level of the environment is above 45
dB, a volume gain of at least 20 dB above the ambient level shall be user
selectable. A function shall be provided to automatically reset the volume
to the default level after every use. |
|
|
|
(g)
Color coding shall not be used as the only means of conveying information,
indicating an action, prompting a response, or distinguishing a visual
element. |
|
Color
coding for wire placement is supported by an instruction sheet that
contains a description of the geometric layout of the wiring. |
|
(h)
When a product permits a user to adjust color and contrast settings, a
range of color selections capable of producing a variety of contrast
levels shall be provided. |
|
Adjustment
of color and contrast settings is not performed directly by a user with
this device, except by the use of software applications. |
|
(i)
Products shall be designed to avoid causing the screen to flicker with a
frequency greater than 2 Hz and lower than 55 Hz. |
|
This
product does not affect screen flicker rate. |
|
(j)
(1) Products which are freestanding, non-portable, and intended to be used
in one location and which have operable controls shall comply with the
following: The position of any operable control shall be determined with
respect to a vertical plane, which is 48 inches in length, centered on the
operable control, and at the maximum protrusion of the product within the
48 inch length on products which are freestanding, non-portable, and
intended to be used in one location and which have operable controls. |
|
This
product has no controls. |
|
(j)(2)
Products which are freestanding, non-portable, and intended to be used in
one location and which have operable controls shall comply with the
following: Where any operable control is 10 inches or less behind the
reference plane, the height shall be 54 inches maximum and 15 inches
minimum above the floor. |
|
This
product has no controls. |
|
(j)(3)
Products which are freestanding, non-portable, and intended to be used in
one location and which have operable controls shall comply with the
following: Where any operable control is more than 10 inches and not more
than 24 inches behind the reference plane, the height shall be 46 inches
maximum and 15 inches minimum above the floor. |
|
This
product has no controls. |
|
(j)(4)
Products which are freestanding, non-portable, and intended to be used in
one location and which have operable controls shall comply with the
following: Operable controls shall not be more than 24 inches behind the
reference plane. |
|
This
product has no controls. |